Setting Up The Add Label - Avery Berkel IM Series User Instructions

46
4.7

Setting up the ADD label

The ADD function enables you to obtain a label with totals printed on it.
Your machine can be configured to print one of four types of ADD labels:
• weighed and non weighed transactions with a label after each transaction and a single
ADD label at the end of all the transactions.
• weighed and non weighed transactions with a single ADD label at the end of all the
transactions.
• weighed and non weighed transactions with a single `receipt' type ADD label at the
end of all the transactions.
• weighed and non weighed transactions with a label after each transactions and a
single `receipt' type ADD label at the end of all the transactions.
For information on sell by dates see
For information on sales texts see
Please remember .....
•
• The barcode format for the ADD label is the receipt barcode format programmed for
the machine unless the labels are for a single PLU. In this case the PLU barcode
format will be used.
System Data
Figure 4.12 Creating an ADD label
Programming the machine
is not operable when the machine is set to Receipt Mode.
1 Products
6 Label Details
Add Label Text (200 chars. max.)
Barcode Disabled/Enabled
Date 1 Disabled
Date 1 Days
Date 1 Months
Date code, page
Sales message, page
1 Add Label
Label Format
4.7 Setting up the ADD label
51.
50.
IM series User Instructions