Printing - Avery Berkel IM Series User Instructions

22
3.5

Printing

IM Series scales are supplied with a label/receipt printer. The printer will accept label or
continuous paper rolls of two core diameters.
The printer is fitted with a small hub to take paper or label rolls with the small core.
A larger sleeve is provided to clip over the small hub for use with large core paper and
label rolls.
Check that the correct size of hub is fitted before loading the paper or label roll.
Figure 3.5
Before you use your scale you should:
• check that the appropriate type of printer roll is loaded.
• adjust the label width guide if you load a printer roll of a different width.
Note: Printers using labels automatically adjust to accommodate labels of a different
length.
CAUTION: Should labels become stuck in the printer, under no circumstances use a metal
object to clear the blockage.
CAUTION: Do not use sharp or metal objects to remove accumulated debris.
CAUTION: The use of non-approved printer rolls may reduce the life of the print head and
invalidate your warranty.
Approved labels and paper rolls are available from a number of suppliers, whose
addresses can be obtained from your Avery Berkel centre.
• The message Products appears on the display to inform you that the printer roll is
finished.
• If labels are jamming in the printer you will see the message Label Feed Error.
Getting started
Changing the printer hub
Check that the arrow on the spindle
points towards the scale.
IM series User Instructions
3.5 Printing