Printer Set-Up - Avery Berkel IM Series User Instructions

5.3 Printer set-up

5.3 Printer set-up
This group of functions enable you to customise the way in which your machine
generates and prints labels, receipts and talons.
Label setup
These options allow you to choose:
• how you want labels to look and
• the way in which you want labels to be generated and printed.
Label type
You can select either separate or continuous labels.
Continuous paper
Continuous labels can be printed on a tally roll or on a continuous label roll. If you use
varying lengths or formats for labels, printing on a continuous label roll uses the printer
roll more economically.
Separate
Labels are printed on label rolls with separate labels. These labels must be the
appropriate size to accommodate the label format assigned to the PLU or to the machine.
Selecting label format
The label format can be open or closed.
There are 12 standard label formats and four nutritional label formats available. Any of
the formats can be set to suit your requirements.
• Open label format.
Labels are printed according to the format stored in the PLU record.
• Closed label format.
Labels are printed using the label format you have assigned to the machine.
If you machine is operating in Hand Price mode the label format assigned to the machine
will be used.
Tare interlock
If the tare interlock is enabled, you will only be able to print a label if you have selected a
tare.
Suppressing symbols
If symbols are enabled then symbols, for example, £, kg, £/ are printed on labels. If you
want to use pre-printed labels you can choose to disable symbols.
IM series User Instructions
67
Machine Set-up