Avery Berkel IM Series User Instructions page 35

36
Tare weight (stored tare)
Programmed (stored) tares are only available for use when the machine is set to label
mode or pre-pack mode.
When goods are to be weighed in containers, you can set up tare values (container
weights) which are stored against a reference number from 0 to 39.
1 Products
2
3
4
5 Tables
6.........
Repeat with a new reference number to create more tare references.
Figure 4.4
Assigning a stored tare
You can
• enter a tare reference number when programming PLUs
• See section
• enter a tare reference when assigning a dedicated (preset) tare key.
See section
Note: For instructions on using a preset tare key see
page 113.
Discount rates
There are two types of discount rate
• percentage
• value
Discount rates can be fixed or variable. You can program up to 9 discount rates and you
can enter up to 16 characters for the discount text. If no discount text is programmed, in
sales mode the display will show either Discount Value or Discount Percent.
You can set the security level for each discount rate. An operator will only be able to
apply discount rates with a security level equal to or lower than his/her own security level.
Programming the machine
System Data
1
2 Tare Weight
3
4..........
Creating a stored tare reference
6.4, Tax reference on page
5.2, page 64.
Reference
0 - 9
Tare Weight
or weigh container
84.
section 7.8,
4.3 Setting up data tables
Using preset tare keys on
IM series User Instructions