Avery Berkel IM Series User Instructions page 73

74
If you select TK/Item Keyboard, any numeric entry at the lower keyboard will be treated
as the number of items not the PLU number.
Please remember .....
Make sure that the machine is set up or configured to print labels before enabling self-
service mode.
Manager Mode
1................
4 Machine Setup
5..............
7
Figure 5.8
Please remember .....
Set security for any functions that you do not want to be available from the sales keyboard.
Note: In self-service mode, PLU is cleared after 15 seconds if no label is printed.
The zero key on the sales keyboard is disabled in self-service mode. To re-zero the
machine:
1. Enter manager mode. See
2. Press
Assigning keys
You can assign any programmable key to the TK keyboard in the same way that you
assign keys to the sales keyboard. See
Large keys
Larger keys for product selection can be set up by assigning two adjacent keys, or four
keys in a square block, to the same PLU. Create suitable labels or a keyboard overlay to
suit your own keyboard layout.
Machine Set-up
1.............
5 Machine Mode
6
1 Self Serve Mode
2 Self Serve Keybd
1 TK Keyboard Only
2 Both Keyboards
3 TK/Item Keyboard
Enabling self service mode
To enter Manager
0
.
1
2
3 Self Service
1 Disabled
2 Enabled
Mode,
section 5.2, page
5.6 Machine operating modes
page 30.
64.
IM series User Instructions