Creating A Nutritional Panel - Avery Berkel IM Series User Instructions

6.8 Creating a nutritional panel

6.8 Creating a nutritional panel
You can enter the information required to create a nutritional label at the end of the
Create & Edit function.
The nutritional label shows the weight and percentage per serving of the nutrient content
of a product relative to the recommended daily intake. You can print nutrition facts on a
separate label either before or after the PLU label.
The format of this label is factory set and cannot be altered. Label rotation can be 0° or
180° and you can select either long label format or short label format, as shown in
6.10, according to the label format number programmed in the PLU.
Use label formats numbered 12 to 15 for these fixed format nutritional labels.
Figure 6.10 Fixed nutri panel label
If you are using label rolls then the nutritional and PLU labels must be the same size. If
you are using continuous labels then the size of both labels can differ.
IM series User Instructions
Long format Short format
97
Figure
Programming Products