Setting Up The Audit Function - Avery Berkel IM Series User Instructions

206
13.1

Setting up the audit function

Filtering the information
You can set up the audit function to:
•
or
•
•
•
Server/client buffer mode
Note: Client buffer mode only takes effect in local mode.
If you select Circular you will be able to continue trading when the audit store is
full but new audit transactions will over write the oldest audit transactions. You
will not see any warning messages.
If you select Linear you will see flashing warning messages Audit 75% Full and
Audit 90% Full as the number of transactions in the audit store approach the
maximum permitted. The message replaces the scroll message on the vendor
display in sales mode and is also displayed if you go to the network map in
manager mode.
Note: Normally the server buffer mode is set to circular and the clients are set to
linear.
•
•
•
•
To continue trading you must either Erase Audit List or print the Audit Report
and then Erase Audit List to clear the audit store of transactions.
Label override
Label override allows you to continue trading when the client audit buffer mode is
linear and the buffer is full.
This is the default mode for machines operating in label mode. The Audit Full
message will be displayed on every transaction until the audit buffer has been
cleared.
Press
Audit Mode
include label or receipt totals or both
include stock or account totals or both.
be able to continue trading when the audit store is full (circular).
to have to clear audit transactions before trading can continue when the audit
store is full (linear).
An error message is displayed at three stages:
Audit 75% Full when the audit store is 75% full.
Audit 90% Full when the audit store is 90% full.
Audit Full when there is no space left in the audit store.
to clear the message and complete the transaction.
13.1 Setting up the audit function
IM series User Instructions