Avery Berkel IM Series User Instructions page 32

4.2 Creating and editing text
Figure 4.3
Inserting text
To insert text, press
far right-hand edge of the display. Enter the new text.
Inverted text
You can print text in inverse print:
X
1. Press
2. Select the relevant control from the list displayed:
• Inverse On is displayed as <INVERSE>
• Inverse Off is displayed as <!INVERSE>
• Strike Out On is displayed as <STRIKE OUT>
• Strike Out Off is displayed as <!STRIKE OUT>
Displaying text
When you recall already entered text, the display shows either the entire text, if it is 16
characters or less, or the first 16 characters of a long description.
• Press
text.
• Press
Correcting the last character displayed
1. Press
2. Enter the character required.
IM series User Instructions
Typical fonts
or
X
X
twice during text entry
Shift
then to move to the previous line feed or to the start of displayed
Shift
then to move to the next line feed or to the end of displayed text.
to delete the last character.
until the character preceding the new text is at the
Programming the machine
33