Error Messages - Avery Berkel IM Series User Instructions

16.2 Error messages

16.2 Error messages
Whilst using the machine, you may see messages on the display to help you when things
go wrong. These messages, and the action you should take, are listed below.
CALIBRATION LOST
The machine is not weighing accurately. Do not use the machine. Contact Avery Berkel.
CHECKSUM FAILURE
Contact Avery Berkel.
COMMS ERROR
There has been a breakdown in communications between machines. Check network
map.
FILE TYPE ERROR
The files stored by the data backup tool. do not match those set in the machine.
FORMAT ERROR
You are trying to load the wrong type of file from the data backup tool. Check the file
format.
HARDWARE ERROR
If necessary, press
switch it back on. Contact Avery Berkel if the fault persists.
HARDWARE ERROR
Contact Avery Berkel.
INVALID ENTRY
You are trying to enter a tare value which is not a multiple of the display division. Enter a
correct tare value.
You have tried to enter an incorrect barcode format.
You are trying to enter a machine ID that conflicts with another client machine.
INVALID OPTION
You are trying to select an option not permitted at your machine.
LABEL FEED ERROR
The printer has run out of labels or is not feeding the labels correctly. Check the printer.
You are trying to print the wrong type of label. Check printer set up.
If you are using pre-printed labels check with Avery Berkel that the labels are suitable.
LABEL NOT TAKEN
You are trying to obtain a label before removing the previous one.
IM series User Instructions
to stop the machine bleeping. Switch off the machine and
231
Help