Avery Berkel IM Series User Instructions page 83

84
Note: For more information on creating and assigning departments refer to
Creating departments on page
PLU text
You can program one display text area and up to two printable text areas. You can enter
up to 16 characters in the display text and each PLU print text area can have a maximum
of 1500 characters.
• PLU text 1 is the default text for printing on receipts and labels including ingredients.
• PLU text 2 is printed on labels provided that the label format contains the appropriate
text field.
PLU display text (16 characters)
If no display text has been previously programmed you will see the message Enter Text.
If text has been programmed before it will be displayed and you can remove it or change
it.
PLU text 1 (1500 characters)
If no text has been previously programmed in PLU text 1 and the PLU display text area
has been left blank, you will see the message PLU Text 1. The message clears
automatically when you enter text.
• If no text has been previously programmed in PLU text 1, any text programmed in the
display text area is copied to PLU text 1. You can remove or edit this text to suit your
requirements.
PLU text 2 (1500 characters)
If no text has been previously programmed you will see the message PLU Text 2. The
message clears automatically when you enter text.
• If Traceability has ben enabled in the PLU and the machine is in pre-pack mode, then
the carcass text will be printed in the text 3 field.
Note: For substitution codes that you can use in PLU text messages 1 and 2 refer to
section 4.8,
Tax reference
Each PLU can have a tax reference assigned to it.
Programming Products
43.
Dept 2
Bakery
Dept 3
Fresh meat
Sales message on page
1
7
+
1
7
1
+
7
50.
6.4 Creating and Editing PLUs
section
=
=
=
IM series User Instructions
4.5,