Manager Mode - Avery Berkel IM Series User Instructions

4.1 Manager mode

4.1 Manager mode
Please remember .....
You must be in manager mode in order to perform a programming operation.
Keyboard overlay
Your machine is supplied with a reversible keyboard operator/programming overlay.
Revealing the programming overlay
1. Hold the overlay by the tab and slide it down to remove it from behind the protective
cover.
2. Reverse the overlay to reveal the programming side.
3. Slide the top edge of the overlay up under the protective cover until the bottom edge
rests on the supports
.
Figure 4.1
IM series User Instructions
Programming overlays
0
Programming the machine
29