Avery Berkel IM Series User Instructions page 53

54
• Each operator may be assigned a PIN between 0 and 99999999 which must be
entered when logging on or off. If the PIN is left at 0, a PIN is not required when
logging on or off.
If you make a mistake while entering the number press
Changing PIN
If you have set up and assigned a dedicated PIN key, the operator can change his or her
PIN in sales mode, see
Please remember .....
Always ensure that at least one operator has a security level set high enough to be able to
change PINs and operator security in Manager Mode. If you accidentally set all the security
levels too low see
Operator security level
• There are three security levels from 0 to 2.
• The security level determines operator access to scale functions.
• The operator will have access to those functions whose security level is the same as
or less than their own security level.
Operator status
The default operator mode is trading. You can change the operator mode from trading to
training (or back again from training to trading) provided that there are no outstanding
transactions against that operator.
• If there are any current transactions you will see the message Print Trans. displayed
briefly and the machine will revert to the previous mode.
• If there are totals outstanding you will see the message Clear Trans. No.?. Press
for the operator.
Trading
All transactions carried out by the operator are added to the trading totals stored by the
machine
Training
The operator's transactions are added to the operator totals and the training value is
listed in the operator totals report.
Operator training text
Each time an operator is changed from trading to training you have the opportunity to
change the training text or remove it.
Programming the machine
section
section 16.1, page
, or press to return to the previous mode without clearing transactions
7.1, page 100.
230.
4.9 Programming Operators
and start again.
IM series User Instructions