Network Map - Avery Berkel IM Series User Instructions

216
14.5

Network map

The network map at any machine shows the positions (machine ID) of all the machines
on the network.
At each position on the map corresponding to a machine you will see a character
indicating the machine status. The flashing character indicates the ID of the machine
currently being used to display the network map.
Note: You can only change the status of a machine at that machine. For instructions for
selecting client or server status see
Figure 14.4 Network map
The following table defines the characters you may see on the network map.
Character
S
C
X
E
O
L
B
Communications
1 -10
SCCXXXXCCX
or
Server: responsible for overseeing the network
Client
No machine set up.
The PLU file in the client machine at that position does not match the server PLU file.
The machine corresponding to that position is off line. (Map Error)
The machine is set to
Local Mode.
Backup server
section 14.4, page 215.
Meaning

14.5 Network map

IM series User Instructions