Configuring Rmon Alarms - Lenovo Flex System Fabric CN4093 Application Manual

Configuring RMON Alarms

Alarm Example 1
Alarm Example 2
© Copyright Lenovo 2015
This example configuration creates an RMON alarm that checks ifInOctets on
port 20 once every hour. If the statistic exceeds two billion, an alarm is generated
that triggers event index 6.
Configure the RMON Alarm parameters to track the number of packets received
on a port.
CN4093(config)# rmon alarm 1 oid 1.3.6.1.2.1.2.2.1.10.129
CN4093(config)# rmon alarm 1 alarm­type rising
CN4093(config)# rmon alarm 1 rising­crossing­index 100
CN4093(config)# rmon alarm 1 interval 3600
CN4093(config)# rmon alarm 1 rising­limit 2000000000
CN4093(config)# rmon alarm 1 owner "Alarm for ifInOctets"
This example configuration creates an RMON alarm that checks icmpInEchos on
the switch once every minute. If the statistic exceeds 200 within a 60 second
interval, an alarm is generated that triggers event index 5.
Configure the RMON Alarm parameters to track ICMP messages.
CN4093(config)# rmon alarm 1 oid 1.3.6.1.2.1.5.8.0
CN4093(config)# rmon alarm 1 alarm­type rising
CN4093(config)# rmon alarm 1 rising­crossing­index 110
CN4093(config)# rmon alarm 1 interval­time 60
CN4093(config)# rmon alarm 1 rising­limit 200
CN4093(config)# rmon alarm 1 sample delta
CN4093(config)# rmon alarm 1 owner "Alarm for icmpInEchos"
Chapter 38: Remote Monitoring
527