Vnic Teaming Failover - Lenovo Flex System Fabric CN4093 Application Manual

vNIC Teaming Failover

234
CN4093 Application Guide for N/OS 8.2
For NIC failover in a non‐virtualized environment, when a service group's external
uplink ports fail or are disconnected, the switch disables the affected group's
internal ports, causing the server to failover to the backup NIC and switch.
However, in a virtualized environment, disabling the affected internal ports would
disrupt all vNIC pipes on those ports, not just those that have lost their external
uplinks (see Figure 28).
Figure 28. Regular Failover in a Virtualized Environment
Primary
Lenovo Switch
X
VNIC
Group 1
EXT1
VNIC
Group 2
EXT2
EXT1 link failure automatically
disables associated internal ports,
prompting failover on all VMs
To avoid disrupting vNICs that have not lost their external uplinks, N/ OS 8.2 and
the Emulex Virtual Fabric Adapter for Lenovo Flex System provide vNIC‐aware
failover.
In the dedicated mode, when a vNIC group's external uplink ports fail, the switch
cooperates with the affected NIC to prompt failover only on the appropriate
vNICs. This allows the vNICs that are not affected by the failure to continue
without disruption (see Figure 29 on page
Lenovo
Servers
Virtual
NIC
Pipes
VNIC
X VNIC
VNIC
VNIC
INTA1
VNIC
VNIC
VNIC
VNIC
VNIC
VNIC
X
VNIC
VNIC
INTA2
VNIC
VNIC
VNIC
VNIC
NIC
To Backup
Switch
235).
Hypervisor
vSwitch
VM 1
VM 2
vSwitch
VM 3
VM 4
Hypervisor