Vmready Configuration Example - Lenovo Flex System Fabric CN4093 Application Manual

vCenter VE Details

VMready Configuration Example

1. Enable the VMready feature.
2. Specify the VMware vCenter IPv4 address.
3. Create the VM profile.
© Copyright Lenovo 2015
If a vCenter is available, the following ISCLI privileged EXEC command displays
detailed information about a specific VE:
CN4093# show virt vmware showvm {<VM UUID>|<VM IPv4 address>|<VM name>}
­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
MAC Address 00:50:56:9c:21:2f
Port 4
Type Virtual Machine
VM vCenter Name halibut
VM OS hostname localhost.localdomain
VM IP Address 172.16.46.15
VM UUID 001c41f3­ccd8­94bb­1b94­6b94b03b9200
Current VM Host 172.16.46.10
Vswitch vSwitch0
Port Group BNT_Default
VLAN ID 0
This example has the following characteristics:
 A VMware vCenter is fully installed and configured prior to VMready configura‐
tion and includes a "bladevm" administration account and a valid SSL certifi‐
cate.
The distributed VM group model is used.

 The VM profile named "Finance" is configured for VLAN 30, and specifies
NIC‐to‐switch bandwidth shaping for 1Mbps average bandwidth, 2MB bursts,
and 3Mbps maximum bandwidth.
 The VM group includes four discovered VMs on internal switch ports INT1A
and INT2A, and one static trunk (previously configured) that includes external
ports EXT2 and EXT2.
CN4093(config)# virt enable
CN4093(config)# virt vmware vmware vcspec 172.16.100.1 bladevm
When prompted, enter the user password that the switch must use for access to the
vCenter.
CN4093(config)# virt vmprofile Finance
CN4093(config)# virt vmprofile edit Finance vlan 30
CN4093(config)# virt vmprofile edit Finance shaping 1000 2000 3000
259
Chapter 17: VMready