3. Turn on RIP globally and enable RIP for each interface.
© Copyright Lenovo 2015
CN4093(config)# router rip
CN4093(configrouterrip)# enable
CN4093(configrouterrip)# exit
CN4093# interface ip 2
CN4093(configipif)# ip rip enable
CN4093(configipif)# exit
CN4093# interface ip 3
CN4093(configipif)# ip rip enable
CN4093(configipif)# exit
Use the following command to check the current valid routes in the routing table of
the switch:
CN4093# show ip route
For those RIP learnt routes within the garbage collection period, that are routes
phasing out of the routing table with metric 16, use the following command:
CN4093# show ip rip routes
Locally configured static routes do not appear in the RIP Routes table.
Chapter 27: Routing Information Protocol
389