Lenovo Flex System Fabric CN4093 Application Manual page 374

IPv6 Example 2
1. Assign an IPv6 address and prefix length to the interface.
2. Configure the IPv6 default gateway.
3. Configure Router advertisements for the interface (optional)
4. Verify the configuration.
374
CN4093 Application Guide for N/OS 8.2
Use the following example to manually configure IPv6 on an interface.
CN4093(config)# interface ip 3
CN4093(config­ip­if)# ipv6 address
2001:BA98:7654:BA98:FEDC:1234:ABCD:5214
CN4093(config­ip­if)# ipv6 prefixlen 64
CN4093(config­ip­if)# ipv6 seccaddr6 2003::1 32
CN4093(config­ip­if)# vlan 2
CN4093(config­ip­if)# enable
CN4093(config­ip­if)# exit
The secondary IPv6 address is compressed, and the prefix length is 32.
CN4093(config)# ip gateway6 1 address
2001:BA98:7654:BA98:FEDC:1234:ABCD:5412
CN4093(config)# ip gateway6 1 enable
CN4093(config)# interface ip 3
CN4093(config­ip­if)# no ipv6 nd suppress­ra
CN4093(config­ip­if)# show layer3