Lenovo Flex System Fabric CN4093 Application Manual page 503

10gb converged scalable switch
Hide thumbs Also See for Flex System Fabric CN4093:
Table of Contents

Advertisement

User Configuration Example
1. To configure a user with name "admin," authentication type MD5, and 
authentication password of "admin," privacy option DES with privacy password 
of "admin," use the following ISCLI commands.
2. Configure a user access group, along with the views the group may access. Use the 
access table to configure the group's access level.
3. Assign the user to the user group. Use the group table to link the user to a 
particular access group.
© Copyright Lenovo 2015
Users can be configured to use the authentication/privacy options. The CN4093 
support two authentication algorithms: MD5 and SHA, as specified in the 
following command:
CN4093(config)# snmp­server user <1‐17> authentication­protocol {md5|sha
authentication­password
‐or‐
CN4093(config)# snmp­server user <1‐17> authentication­protocol none
CN4093(config)# snmp­server user 5 name admin
CN4093(config)# snmp­server user 5 authentication­protocol md5 
authentication­password
Changing authentication password; validation required: 
Enter current admin password:
Enter new authentication password:
Re­enter new authentication password: <auth. password>
New authentication password accepted.
CN4093(config)# snmp­server user 5 privacy­protocol des privacy­password
Changing privacy password; validation required:
Enter current admin password:
Enter new privacy password:
Re­enter new privacy password:
New privacy password accepted.
CN4093(config)# snmp­server access 5 name admingrp
CN4093(config)# snmp­server access 5 level authpriv
CN4093(config)# snmp­server access 5 read­view iso
CN4093(config)# snmp­server access 5 write­view iso
CN4093(config)# snmp­server access 5 notify­view iso
Because the read view, write view, and notify view are all set to "iso," the user 
type has access to all private and public MIBs.
CN4093(config)# snmp­server group 5 user­name admin
CN4093(config)# snmp­server group 5 group­name admingrp
If you want to allow user access only to certain MIBs, see "View‐Based 
Configuration," next.
<admin. password>
<auth. password>
<admin. password>
<privacy password>
<privacy password>
Chapter 37: Simple Network Management Protocol
503

Advertisement

Table of Contents
loading

Table of Contents