Lenovo Flex System Fabric CN4093 Application Manual page 511

© Copyright Lenovo 2015
The SNMP agent also supports two Spanning Tree traps as defined in RFC 1493:
 NewRoot
 TopologyChange
The following are the enterprise SNMP traps supported in Lenovo N/OS:
Table 41.
Lenovo N/OS‐Supported Enterprise SNMP Traps
Trap Name
altSwLoginFailure
altSwValidLogin
altSwApplyComplete
altSwSaveComplete
altSwFwDownloadSucess
altSwFwDownloadFailure
altSwValidLogout
altSwDefAdminDisable
altSwAcntStrngPswdNotMet
altSwAcntLocked
altSwAcntUnlocked
altSwSNMPBlockIPTrap
Description
Signifies that someone failed to
enter a valid username/password
combination.
altSwTrapDisplayString
specifies whether the login attempt
was from CONSOLE or TELNET. In
case of TELNET login it also
specifies the IP address of the host
from which the attempt was made.
Signifies that a user login has
occurred.
Signifies that new configuration has
been applied.
Signifies that new configuration has
been saved.
Signifies that firmware has been
downloaded to
[image1|image2|boot image].
Signifies that firmware
downloaded failed to
[image1|image2|boot image].
Signifies that a user logout has
occurred.
Signifies that the default admin
account has been disabled.
Signifies that the configured
password does not match strong
password complexity.
Signifies that account has been
locked.
Signifies that account has been
unlocked.
Signifies that SNMP requests are
blocked; trap includes the blocked
IP address.
Chapter 37: Simple Network Management Protocol
511