Lenovo Flex System Fabric CN4093 Application Manual page 127

3. Configure the priority value for the protocol.
4. Add member ports for this PVLAN.
5. Enable the PVLAN.
6. Verify PVLAN operation. .
© Copyright Lenovo 2015
CN4093(config­vlan)# protocol­vlan 1 priority 2
CN4093(config­vlan)# protocol­vlan 1 member 1,2
Note: If VLAN tagging is turned on and the port being added to the VLAN has a
different default VLAN (PVID/Native VLAN), you will be asked to confirm changing
the PVID to the current VLAN.
CN4093(config­vlan)# protocol­vlan 1 enable
CN4093(config­vlan)# exit
CN4093(config)# show vlan
VLAN Name Status MGT Ports
­­­­ ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ ­­­­­­ ­­­
­­­­­­­­­­­­­­­­­­­­­­­­­
1 Default VLAN ena dis INTA2­EXT15 EXT19
2 VLAN 2 ena dis INTA1 INTA2
Primary Secondary Type Ports vPorts
­­­­­­­ ­­­­­­­­­ ­­­­­­­­­­­­­­­ ­­­­­­­­­­­­­­­­­­­­­
­­­­­­­­­­­­­­­­­­­­­
PVLAN Protocol FrameType EtherType Priority Status Ports
­­­­­ ­­­­­­­­ ­­­­­­­­­­­­­­­­­­­­ ­­­­­­­­ ­­­­­­
­­­­­­­­­­­­­­­­­
2 1 Ether2 0800 2 enabled INTA1 INTA2
PVLAN PVLAN­Tagged Ports
­­­­­ ­­­­­­­­­­­­­­­­­­­­­­­­­­­
none none
127
Chapter 9: VLANs