Labels; Changing The Paper Tray Size - Fujitsu 10 ppm User Manual

10/14 ppm page printer
Table of Contents

Advertisement

Handling Paper
3-24

Labels

This printer prints well on labels if you carefully follow these guidelines:
• Be careful to use labels under normal operating conditions. Labels are
sensitive to temperature and humidity.
• Use the rear stacker so that labels are ejected straight out the back to
minimize curl.
• Use only labels without backing sheets exposed in the printable area.
Labels mounted separately on a backing sheet tend to slip, resulting in
crocked print.
Backing
sheet is
exposed.
Not acceptable
• Test-print labels before using them. If jamming problems occur and
continue, try a different type of label.

Changing the Paper Tray Size

The paper tray can be adjusted to one of the three paper sizes: A4,
A5, LTR (Letter), and EXE (Executive). If the paper tray is preset
for one of these paper sizes at purchase, however, you cannot adjust
it to the Legal size. To change the size, follow these steps:
Rear guide
Left guide
Label
Acceptable
1. Remove the paper tray
from the printer.
Refer to the illustration for
the parts you adjust when
changing the size of the
tray.
Right guide
Paper size
indicator
Backing sheet
is not
exposed.
User's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

14 ppmPrintpartner 10vPrintpartner 14v

Table of Contents