Table of Contents
Advertisement
Selecting an
Emulation
User's Manual
The PrintPartner 12M has three emulations as a standard feature:
PCL6, IBMPRO, and EPSON. The PrintPartner 12MX has four
emulations: PCL6, FPS, IBMPRO, and EPSON. You can use these
emulations to connect your printer to different computers. PCL6
emulates HP LaserJet 5 printers, IBMPRO emulates IBM
Proprinters 4204, EPSON emulates EPSON EX-800 printers, and
FPS emulates PostScript Level 2 compatible printers by the
PowerPage® Level 2 interpreter.
The printer automatically selects the active emulation with default
settings. To specify an emulation, use the control panel in menu
mode and use the Personality menu of the Config menu as shown
below.
POWER
ONLINE
DATA
ERROR
READY
FORM
READY
FEED
MENU
RESET
MENU
CONT.
SELECT
ENTER
RESET
MFF
SELF
PAPER SIZE
PAPER SIZE
TEST
POWER
ONLINE
DATA
ERROR
SETUP MENU
CONFIG MENU
POWER
ONLINE
DATA
ERROR
PERSONALITY
AUTO*
Selecting an Emulation
1. Enter setup mode. Press the
button to put the
READY
printer offline (the
ONLINE indicator turns
off). Then, press the
+
button briefly six times.
The message display
–
indicates
CONFIG MENU
PRINT
FONT
2. Select the Personality
menu. Press the
button briefly. The message
display indicates
PERSONALITY AUTO*
3. Select emulation. Press the
button briefly. The
ENTER
option
AUTO
PCL
,
PS
,
then back to
the
READY
the desired option is
displayed.
GETTING
STARTED
MENU
SETUP MENU
.
ENTER
.
changes to
IBMPRO
,
EPSON
AUTO
. Press
button when
1-21
Advertisement
Table of Contents
