Acl > Acl Finder - D-Link Web Smart Switch DGS-1210-16 Reference Manual

Configuration
Rule Detail: Specifies the detail of the rule.
Access ID – Specifies the Access ID (1-65535).
Type – Displays the type of rule. MAC, or IP.
VLAN ID – Specifies the VLAN ID.
Destination MAC Address - Enter a destination MAC address.
Source MAC Address - Enter a source MAC address.
Destination IP Address - Enter a destination IP address.
Source IP Address - Enter a source IP address.
802.1p – Specifies the 802.1p value.
DSAP – Specifies the DSAP field in LLC header.
SSAP – Specifies the SSAP field in LLC header.
Control – Specifies the Control field in LLC header.
DSCP – Specifies the DSCP value for this rule. This value must be between 0 and 63.
TOS – Specifies the TOS value for this rule. This value must be between 0 and 15.
Precedence - Specifies the precedence value for this rule. This value must be between 0 and 7.
IP Protocol – Displays the IP protocol of access rule.
IGMP – Specifies the IGMP value for this rule. This value must be between 0 and 255.
Type – Specifies the type. The possible value is from 0 to 255.
Code – Specifies the code of access rule. The field range is from 0 to 255.
Source Port – Specifies the source port number of the access rule. This value must be between 0
and 65535.
Destination Port – Specifies the destination port number of the access rule. This value must be
between 0 and 65535.
Protocol ID – Specifies the protocol ID between 0 and 255.
Ports – Specifies the switch ports that you want to implement the access rule to.
Action – Specifies the ACL forwarding action matching the rule criteria. Permit forwards packets if
all other ACL criteria are met. Deny drops packets if all other ACL criteria is met.
Click Apply to make it effective.
To modify an existing rule, please click on the Access ID hyperlink.
ACL > ACL Finder
This page is used to help find a previously configured ACL entry. To search for an entry, enter the profile ID
from the drop-down menu, select a port that you wish to view, define the state and click Search. The table
on the lower half of the screen will display the entries. To delete an entry, click the corresponding Delete
button.
NOTE: The switch begins the access rule with the
smallest access ID, so be careful in assigning the
ID for the expected results.
Figure 4.95 – ACL > Access Profile List > Access Rule List
8 1
8 1
D-Link Web Smart Switch User Manual