Acl > Acl Finder - D-Link SmartPro DGS-1500-20 User Manual

5 Configuration
Profile Information displays the information to which the rule is being added to, including Profile ID and
Source MAC.
In Rule Detail, you can specify the details of an access rule. Below are all the possible parameters that can
be set.
Access ID: Specify the Access ID (1-65535).
Type: Display the type of rule.
Source MAC Address: Specify the Source MAC address, the field of format is xx-xx-xx-xx-xx-xx.
Ports: Specify the switch ports that you want to implement the access rule to.
Action: Specify the ACL forwarding action matching the rule criteria. Permit forwards packets if all
other ACL criteria are met. Deny drops packets if all other ACL criteria is met.
Click Apply to make it effective.
To modify an existing rule, please click on the Access ID hyperlink.
ACL > ACL Finder
This page is used to help find a previously configured ACL entry. To search for an entry, enter the profile ID
from the drop-down menu, select a port that you wish to view, define the state and click Search. The table
on the lower half of the screen will display the entries. To delete an entry click the corresponding Delete
button.
Figure 5.90 – Add Access Rule
NOTE: The switch begins the access rule with the
smallest access ID, so be careful in assigning the
ID for the expected results.
Figure 5.91 – ACL > Access Profile List > Access Rule List
Figure 5.92 – ACL > ACL Finder
6 7
6 7
D-Link Web Smart Switch User Manual