Configuration > Igmp Snooping > Limited Multicast Range Settings; Configuration > Igmp Snooping > Max Multicast Group Settings - D-Link DES-1210/ME Series Manual

4 Configuration
Profile Type: Specify the profile type to be IPv4 or IPv6.
Profile ID: Specify the Profile ID.
Profile Name: Specify the Profile Name.
Click Add to create a new IP Multicast Profile.
Select Profile Type to display the IP Multicast Profile entry. The options are IPv4 and IPv6.
Click Delete All to clear all the entries.
Configuration > IGMP Snooping > Limited Multicast Range Settings
The Limited Multicast Range Settings page allows user to configure the Limited Multicast. Specify the port
range, select Access IP Type is IPv4 or IPv6 and select the Access is Deny or Permit then click Apply to
implement changes made.
Figure 4.78- Configuration > IGMP Snooping > Limited Multicast Range Settings
From Port / To Port: Specify the port ranges to be configured.
Profile Type: Specify the profile type is IPv4 or IPv6.
Profile ID: Specify the Profile ID.
Click Add to create the Profile ID with specified ports or click Delete to remove the ports.
Configuration > IGMP Snooping > Max Multicast Group Settings
The Max Multicast Group Settings page allows user to configure the max multicast group for IGMP Snooping.
DES-1210/ME Series Metro Ethernet Managed Switch User Manual
Figure 4.77 - Configuration > IGMP Snooping > IP Multicast Profile Settings
4 4 9 9