Situation In Which The Document Is Not Fed Into The Adf Occurs Frequently - Fujitsu FI-800R Operator's Manual

Situation in Which the Document Is not Fed into the ADF Occurs Frequently

Check the following points
● Do the documents meet the paper requirements? (page 128)
● Did you fan the documents before loading them in the ADF paper chute (feeder)? (page 128)
● Are the pad unit and pick roller installed correctly? (page 128)
Are the pad unit and pick roller clean? (page 128)
●
Are the pad unit and pick roller worn out? (page 128)
●
If the problem persists, refer to
(page 140) and take measures accordingly. If the problem still persists, check each item in
Contact the Scanner Service Provider (page 141)
purchased this product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety Precautions
supplied with this product, and then make an inquiry.
●
Do the documents meet the paper requirements?
Solution
Use documents that meet the requirements.
For details, refer to
●
Did you fan the documents before loading them in the ADF paper chute (feeder)?
Solution
Fan the documents.
For details, refer to
●
Are the pad unit and pick roller installed correctly?
Solution
Install the pad unit and pick roller correctly.
For details, refer to
●
Are the pad unit and pick roller clean?
Solution
Clean the pad unit and pick roller.
For details, refer to
●
Are the pad unit and pick roller worn out?
Solution
Start up the Software Operation Panel to check the counters for the pad unit and pick roller, and if
necessary, replace the pad unit and pick roller.
For details, refer to
The First Measures to Take When You Encounter any Errors or Troubles
Documents for Scanning (page
Preparation (When Loading Multiple Documents) (page
Replacing the Pad Unit (page 96)
Cleaning the Inside of the Scanner (ADF) with a Cloth (page
Checking the Sheet Counters (page
128
first, then contact the distributor/dealer where you
48).
and Replacing the Pick Roller (page
162).
Troubleshooting
Before You
42).
99).
89).