Situation In Which The Document Is Not Fed Into The Adf Occurs Frequently - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 8 Troubleshooting
Situation in which the document is not fed into
the ADF occurs frequently.
Do the documents meet the requirements described in
"Precautions" in "Conditions" (page
Yes
Did you fan the documents before loading them in the ADF
paper chute?
Yes
Are the consumables (*1) installed correctly?
Yes
Are the consumables dirty?
No
Are the consumables worn out?
No
*1: "Consumables" refers to the brake roller and the pick roller.
Use documents that meet the requirements.
41)? For details, refer to
No
Fan the documents before loading, or reduce the amount of documents.
No
Install the consumables correctly.
For details, refer to
No
Clean the consumables.
For details, refer to
Yes
Check the consumable counters and replace them if necessary.
For details, refer to
Yes
If the problem persists, check the items in
Service Provider" (page 149)
an authorized FUJITSU scanner service provider.
"2.3 Documents for Scanning (ADF)" (page
"Chapter 7 Replacing the Consumables" (page
"Chapter 6 Daily Care" (page 108).
"Chapter 7 Replacing the Consumables" (page
"8.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or
TOP
Contents
Index
Introduction
Scanner
41).
Overview
How to Load
Documents
Configuring the
Scan Settings
117).
How to Use the
Operator Panel
Various Ways to
Scan
117).
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
141