Vertical Streaks Appear On The Images - Fujitsu SP-1120N Operator's Manual

Vertical Streaks Appear on the Images

Check the following points
● Are the glass and rollers inside the ADF clean? (page 108)
● Is there any foreign matter (such as dust or paper dust) on the document? (page 108)
● Is [Vertical Streaks Reduction] enabled in the scanner driver for a scan? (page 108)
If the problem still persists, check each item in
117) first, then contact the distributor/dealer where you purchased this product. Refer to the contact
information in the Contact List if supplied with this product, or refer to the contact information in the
Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
●
Are the glass and rollers inside the ADF clean?
Solution
Clean the dirty parts.
For details, refer to
●
Is there any foreign matter (such as dust or paper dust) on the document?
Solution
Remove any foreign matter off the document.
Foreign matter may get on the glass that is inside the ADF, and cause the image to appear dirty.
●
Is [Vertical Streaks Reduction] enabled in the scanner driver for a scan?
Solution
Enable [Vertical Streaks Reduction] in the scanner driver, and then perform a scan.
Daily Care (page 66).
108
Before You Contact the Scanner Service Provider (page
Troubleshooting