Vertical Streaks Appear On The Scanned Image - Fujitsu ScanPartner SP30 Operator's Manual

Chapter 7 Troubleshooting

Vertical streaks appear on the scanned image.

Do the streaks always appear in the same location?
No
Does the vertical streak disappear when you set a lower
resolution?
No
Is there any foreign matter (e.g. dust, paper dust) on the
document?
No
Clean the glass and rollers inside the ADF, or the document bed of the flatbed
(ScanPartner SP30F).
Yes
For details, refer to "Chapter 5 Daily Care" (page
Specify a lower resolution.
Yes
Remove any foreign matter off the document.
It may be carried onto the glass inside the ADF or the document bed of the flatbed
Yes
(ScanPartner SP30F), and cause vertical streaks on the scanned image.
If the problem persists, check the items in
Service Provider" (page 112)
an authorized FUJITSU scanner service provider.
70).
"7.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
100