Vertical Streaks Appear On The Images - Fujitsu fi-8190 Operator's Manual

Vertical Streaks Appear on the Images

Check the following points
● Are the document pad and document bed clean when you scan documents with the flatbed? [fi-8290/
fi-8270/fi-8250/fi-8250U] (page 311)
● Are the glass and rollers inside the ADF clean? (page 311)
Is there any foreign matter (such as dust or paper dust) on the document? (page 311)
●
Is [Vertical Streaks Reduction] enabled in the scanner driver for a scan? (page 311)
●
If the problem still persists, check each item in
330) first, then contact the distributor/dealer where you purchased this product. Refer to the contact
information in the Contact List if supplied with this product, or refer to the contact information in the
Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
●
Are the document pad and document bed clean when you scan documents with the flatbed? [fi-8290/
fi-8270/fi-8250/fi-8250U]
Solution
Clean the dirty parts.
For details, refer to
●
Are the glass and rollers inside the ADF clean?
Solution
Clean the dirty parts.
For details, refer to
●
Is there any foreign matter (such as dust or paper dust) on the document?
Solution
Remove any foreign matter off the document.
Foreign matter may get on the glass that is inside the ADF or on the document bed of the flatbed [fi-8290/
fi-8270/fi-8250/fi-8250U] causing the image to appear dirty.
●
Is [Vertical Streaks Reduction] enabled in the scanner driver for a scan?
Solution
Enable [Vertical Streaks Reduction] in the scanner driver, and then perform a scan.
Daily Care (page 214).
Daily Care (page 214).
311
Before You Contact the Scanner Service Provider (page
Troubleshooting