Auerswald COMpact 5010 VoIP Configuration Manual page 82

Features – Function and Configuration
Limit Telephone Charges (Cost Control)
- A PTMP connection
- A single PTP connection
- A bundled PTP connection comprised of several S
with the same PBX base numbers and the same DDI number block
Furthermore, you can set whether LCR for Call Through calls should
be active for all Call Through users together (COMset
Call Through).
Use/Check of Features
1. Configure LCR and activate it for a telephone.
2. Start an external call on the corresponding telephone.
3. Check the call data under COMlist
Dependency/Limitations
5
The update is chargeable.
To use the update method on an ISDN connection inside of Ger-
many, the following requirements need to be met:
- The network provider must allow the use of Call-by-Call dialling for
the selected telephony providers.
- dialling 0 90 09 numbers may not be blocked by the network pro-
vider.
- The number presentation of one's own connection may not be
blocked (CLIR permanent).
As long as the server is busy or does not accept the call (e.g.,
because the data is up to date) no charges are incurred.
To use Call-by-Call locally, it is necessary to select "use in the local
area" for telephony providers in the provider list that support Call-by-
Call locally. If you select "Automatic", only those telephony providers
are used that support Call-by-Call in the local area nationwide.
If the update is cancelled without success (e.g., because the server
has a problem), the PBX no longer has any LCR data after this.
LCR easy is automatically deactivated after deleting the data and
only activated again after the next successful LCR easy update.
This update starts automatically and is forced if the server does not
accept the call by retrying the update. (Exception: If you did not con-
figure the automatic update, you must start the update manually.)
If the server did not accept the call because the data is already up to
date, you can force an update (e.g., because you have changed the
number of telephony providers) by starting a new update within one
hour.
You can make a maximum of five update attempts per day and pre-
sented number.
An update may also be started by telephone.
The current activation status and the time of the last (successful)
update as well as the next automatic update are listed on the page
Soft-LCR easy LCR status.
4
The program Soft-LCR easy is a dialer program registered at the
Bundesnetzagentur (formerly RegTP) for the added-value service
with the added-value number MWD (0 90 09) 00 00 561. The pro-
gram is used to update the Least-Cost-Routing table in the PBX to
enable the automatic dialling of the most cost-effective connection.
During installation, only the configuration program Soft-LCR easy is
installed on the PC. The MWD number is not dialled. Only after ac-
tivation by the user is the MWD number dialled by the PBX. This
configuration program may also be used to configure the program
to dial the MWD number in regular configurable periods to update
the LCR tariff tables automatically. To deactivate the program, turn
off the regular dial-up of the MWD number by the configuration pro-
gram Soft-LCR easy in the PBX. In addition, the configuration pro-
gram Soft-LCR easy can be deinstalled in the program menu.
5
The update is made via the added value number (0 90 09)
00 00 561 (1,86 Euro/ minutes – pulse length 2 seconds; valid until
31.12.10). The price is a German fixed network price. There is a
maximum of 0.93 euros per connection.
82
Features – Function and Configuration
connections
0
Functions
Call charge data list.
Soft-LCR easy is only available for use in Germany.
Note that some telephone service providers do not transmit the
charges. If this type of provider is used (through manual selection or
with the LCR procedure Soft-LCR easy) for making telephone calls,
a call allowance account that has previously been set up does not
work for the call in question, for example. To avoid this, the provider
telephone numbers in question should be entered as restricted num-
bers and this function should be activated for every telephone. If the
LCR procedure Soft-LCR 4.0 is used, the charges are calculated
based on the length of the call and the tariff tables set up separately.
A fallback to a fallback provider is not executed on an analogue con-
nection.
COMpact 5010 VoIP/5020 VoIP - Firmware version 4.0 - Configuration Manual 06 08/11