Auerswald COMpact 5010 VoIP Configuration Manual page 38

Configuration Manual
Configuration Manual
Example 3: Time-dependent Configurations (Day/Night Switching)
Call Distribution on ISDN Point-to-Point Connections
Configure the call distribution as configura-
tion-dependent.
To do this, open the page displayed in the fig-
ure to the right.
Click the appropriate tab to select the
configuration to be changed.
Under "Call distribution for ...", select from
the list field „ISDN Point-to-point connec-
tions".
Under "ISDN Point-to-point connection",
select one of the Point-to-Point connections
already configured from the list field.
Under "Internal no. | name", select an inter-
nal telephone number for the DDI from the list
field.
Then click "Execute" to apply the settings to
the PBX.
Door Call Distribution
Configure door terminal call distribution as
configuration-dependent.
To do this, open the page displayed in the fig-
ure to the right.
Click the appropriate tab to select the
configuration to be changed.
Under "Destination number (internal or
external with exchange
number)", enter the internal and external tel-
ephone number that is to be called when the
door bell button is pressed.
If you have entered an external telephone
number and would like to have a specific tele-
phone number presented to the person being
called, under "Exchange line selection/
number presentation", select a specific con-
nection based on the telephone number of the
person being called.
Then click "Execute" to apply the settings to the PBX.
Relay Settings
Configure Relay 3 as configuration-depend-
ent.
To do this, open the page displayed in the fig-
ure to the right.
Under "Relay mode", select the desired oper-
ational mode (in this case configuration-
dependent) from the list field.
Activate the configurations in which the relays
should be activated.
Under "Identification number for this
relay", select a 2 to 4-digit number.
Under "Name for
the identification number", enter a suitable
name with a maximum of 16 characters.
Then click "Execute" to apply the settings to the PBX.
38
The figure shows you the following page with the settings for
COMset
The figure shows you the following page with the settings for
COMset
line access
The figure shows you the following page with the settings for
COMset
External numbers ISDN connections
Door/switching/music module
Door/switching/music module
COMpact 5010 VoIP/5020 VoIP - Firmware version 4.0 - Configuration Manual 06 08/11
Example 3 on page
Call distribution
Example 3 on page
Call distribution
Example 2 on page
Relay settings Slot 1B TSM
34:
34:
28:
Relay 3