8. CYLINDER HEAD/VALVES
Remove the gasket.
ASSEMBLY
Assembly is in the reverse order of
disassembly.
Torque:
Breather separator bolt:
13 N•m (1.3 kgf•m, 9 lbf•ft)
CAMSHAFT REMOVAL
Remove the cylinder head cover (page 8-5).
Turn the crankshaft clockwise and align the
"T" mark on the flywheel with the index
mark on the right crankcase cover (page 3-9).
Remove the cam chain tensioner lifter sealing
bolt, spring and sealing washer.
Remove the two bolts, cam chain tensioner
and gasket.
Gasket
Bolt
Spring
Cam Chain Tensioner/Gasket
Bolts
XCITING 500
Washer
8-6