KYMCO XCITING 500 Service Manual page 300

16
. BRAKE SYSTEM
Temporarily install the brake arm and the
lock nut.
INSTALLATION
Install the brake pads (page 16-12).
Install the rear/parking brake caliper to the
rear fork and tighten the new mount bolts to
specified torque.
Torque: 32 N•m (3.2 kgf•m, 23 lbf•ft)
Install the brake hose eyelet to the caliper
body with new sealing washers and oil bolts.
Push the brake hose eyelet to the stopper on
the caliper, then tighten the oil bolts to the
specified torque.
Torque: 35 N•m (3.5 kgf•m, 25 lbf•ft)
Fill and bleed the hydraulic system (page 16-
8).
Rear/Parking Brake Caliper
Brake Hose
Bolts Sealing Washers
XCITING 500
Brake Arm
Lock Nut
Bolts
16-30