KYMCO XCITING 500 Service Manual page 190

10
. DRIVE AND DRIVEN PULLEY
DISASSEMBLY
Clutch/Driven Pulley
Hold the clutch/driven pulley assembly with
the clutch spring compressor.
＊
Be sure to use a clutch spring compressor
to avoid spring damage.
Special tool:
Clutch Spring Compressor
Set the tool in a vise and remove the clutch
drive plate nut.
.
Remove the spring compressor and
disassemble the following:
- Clutch assembly
- Driven face spring
- Driven pulley
Remove the washer
Remove the spring collar.
Remove the seal collar.
E053
Driven Face Spring
Spring Collar
XCITING 500
Lock Nut Wrench
Clutch spring compressor
Washer
Seal Collar
10-14