KYMCO XCITING 500 Service Manual page 223

13
. CRANKCASE/CRANKSHAFT
Install the outer washers and two bolts.
Tighten the two bolts to the specified torque.
Torque: 43 N•m (4.3 kgf•m, 31 lbf•ft)
CRANKSHAFT/CRANKCASE
SELECTION
Crankcase and crankshaft are select fitted.
Record the main journal O.D. code (－ or
＋)
Record the main journal bearing I.D. color
code (green, brown or yellow).
Record the right or left crankcase main
journal I.D. code (A or B).
If the crankcase and/or crankshaft are
replaced, select them with the following
fitting table.
The "U" mark in the table indicates that
mating is possible in the crossed code.
Main journal O.D. code
Main journal bearing I.D. color code
/Crankcase main journal I.D. code
Green/A
Green/B
Brown/A
Yellow/B
13-7
Main Journal Bearing I.D. Color Cod
Main Journal O.D. Code
＋ －
U
U
U
U
Crankcase Main Journal I.D. Code
XCITING 500
Bolts/Outer Washer
e