KYMCO XCITING 500 Service Manual page 267

15
. REAR FORK/REAR WHEEL/
XCITING 500
REAR SHOCK ABSORBER
Bolts/Clamps
Install and tighten the rear axle nut to
temporarily.
Install and tighten the rear shock absorber
lower mount bolt to the specified torque.
Torque: 40 N•m (4.0 kgf•m, 29 lbf•ft)
Install the brake hose/cable clamps to the rear
fork and tighten the bolts securely.
Mount Bolt
Axle Nut
Release the main stand and support the
scooter securely on its side stand.
Tighten the rear axle nut to the specified
torque.
Torque: 180 N•m (18 kgf•m, 130 lbf•ft)
Install the rear/parking brake caliper (page
16-30).
Install the muffler (page 2-16).
Lower Mount Bolt
REAR SHOCK ABSORBER
REMOVAL
Remove he luggage box (page 2-3).
Support the scooter securely on its center
stand.
Support the engine securely with a hoist or
equivalent.
Remove the rear shock absorber lower mount
bolt.
15-10