Front Shock Absorber - KYMCO XCITING 500 Service Manual

14.STEERING HANDLEBAR/FRONT WHEEL/

FRONT SHOCK ABSORBER

SERVICE INFORMATION
GENERAL INSTRUCTIONS
• A contaminated brake disc or pad reduces stopping power. Discard contaminated parts and clean
a contaminated disc with a high quality brake degreasing agent.
• This section covers of the front wheel , fork, handlebar, and steering.
• A jack or other support is required to support the vehicle.
• Do not twist or bend the brake hose and pipe when servicing.
• Use genuine KYMCO replacement bolts and nuts for all suspension pivots and mounting points
• Refer to section 16 for brake system information.
SPECIFICATIONS
Minimum tire tread depth
Cold tire pressure
Axle runout
Wheel rim runout
TORQUE VALUES
Handlebar bolt
Steering stem nut
Steering stem lock nut
Steering top thread
Steering stem pinch bolt
Front axle bolt
Front brake disc bolt
Front fork bolt
SPECIAL TOOLS
Long socket wrench
Bearing remover
Oil seal & bearing install driver
ITEM
Driver only
Driver and passenger 225 kPa (2.25kgf/cm
Radial
Axial
23 N•m (2.3 kgf•m, 17 lbf•ft)
62 N•m (6.2 kgf•m, 45 lbf•ft)
45 N•m (4.5 kgf•m, 32 lbf•ft)
17 N•m (1.7 kgf•m, 12 lbf•ft)
23 N•m (2.3 kgf•m, 17 lbf•ft)
55 N•m (5.5 kgf•m, 40 lbf•ft)
42 N•m (4.3 kgf•m, 31 lbf•ft)
Lock bolt: replace with a new one.
23 N•m (2.3 kgf•m, 17 lbf•ft)
E015
E037
E014
STANDARD
⎯
200 kPa (2.00 kgf/cm
2
⎯
⎯
⎯
XCITING 500
Unit: mm (in)
SERVICE LIMIT
1.6 (0.06)
⎯
2
, 29 psi)
⎯
, 32 psi)
0.2 (0.008)
2.0 (0.08)
2.0 (0.08)
14-2