Bulb Replacement - KYMCO XCITING 500 Service Manual

20
. LIGHTS/METERS/SWITCHES

BULB REPLACEMENT

HEADLIGHT
＊
A halogen headlight bulb becomes very
hot while the headlight is ON, and
remain for a while after it is turned OFF.
Be sure to let it cool down before
servicing.
Remove the front cover (page 2-11)
Disconnect the headlight connector from the
headlight bulb and remove the dust cover.
Unhook the retainer and remove the bulb from
the headlight case.
＊
Avoid touching the halogen headlight
bulb. Finger prints can create hot spots
that cause a bulb to break.
Install a new bulb in the headlight case, by
aligning the bulb tab with the case groove.
Hook the retainer.
Install the dust cover properly on to the
headlight and connect the headlight connector
POSITION LIGHT
Remove the front cover (page 2-11).
Remove the bulb socket and position light bulb.
Remove the bulb and replace with a new one.
Installation is in the reverse order of removal.
Headlight Connector
Retainer
Socket
XCITING 500
Dust Cover
Bulb
Bulb
20-2