KYMCO XCITING 500 Service Manual page 132

7. ENGINE REMOVAL/INSTALLATION
Disconnect the water temperature sensor
connector.
Disconnect AICV air supply hose from the
AICV check valve.
Disconnect the spark plug cap from the
cylinder head.
Disconnect the crankcase breather hose form
the cylinder head cover.
Release the rubber cap and remove the
terminal nut to disconnect the starter motor
cable.
7-3
AICV air Supply Hose
Water Temperature Sensor Connector
Crankcase Breather Hose
Spark Plug Cap
Rubber Cap
Nut
XCITING 500