KYMCO XCITING 500 Service Manual page 242

14.STEERING HANDLEBAR/FRONT WHEEL/
XCITING 500
FRONT SHOCK ABSORBER
Upper Pinch Bolt
FORK
REMOVAL
Remove the front wheel (page 14-4).
Remove the front fender (page 2-4).
Remove the bolt and hose clamp.
Remove the bolt and speed sensor (only right
fork).
Washers
Remove the upper fork pinch bolt.
Remove the lower fork pinch bolts.
Remove the fork from the handlebar post and
Speed Sensor Bolt Lower Pinch Bolts
Bolt/Clamp
steering stem.
Mark
INSTALLATION
Install the fork tube into steering stem and
handlebar post and align the mark on the fork
tube with the handlebar post surface as
shown.
Install and tighten the upper pinch bolt to the
specified.
Torque: 23 N•m (2.3 kgf•m, 17 lbf•ft)
Upper Pinch Bolt
14-12