7
. CYLINDER HEAD/VALVES
PEOPL E 125/150
Cylinder Head Cover
CAMSHAFT REMOVAL
Remove the center cover.
Remove the four cylinder head cover bolts to
remove the cylinder head cover.
bolt
O-ring
Remove the cam chain tensioner cap screw
and the O-ring.
Tensioner Screw
Turn the cam chain tensioner screw clockwise
to tighten it.
Camshaft Gear
Turn the flywheel counterclockwise so that
the "T" mark on the flywheel aligns with the
index mark on the crankcase to bring the
round hole on the camshaft gear facing up to
the top dead center on the compression
stroke.
Round Hole
Punch Marks
7-4
www.PlanDeGraissage.org