KYMCO XCITING 500 Service Manual page 122

6
. COOLING SYSTEM XCITING 500
Water Pump Body
Remove the water pump body from the
crankcase.
Align
INSTALLATION
Apply engine oil to a new O-ring and install
it onto the stepped portion of the water
pump.
Install the water pump into the crankcase
while aligning the water pump shaft groove
with oil pump shaft end.
O-ring
Align the mounting bolt holes in the water
pump and crankcase and make sure the
water pump is securely installed.
Install a new O-ring into the groove in the
water pump cover.
Install the water pump cover and tighten the
bolts to the specified toque.
Torque: 13 N•m (1.3 kgf•m, 9 lbf•ft)
Connect the water hoses and bypass hose,
then tighten the hose bands.
Fill the system with recommended coolant
and bleed the air (page 6-6).
6-12