KYMCO XCITING 500 Service Manual page 249

14.STEERING HANDLEBAR/FRONT WHEEL/
FRONT SHOCK ABSORBER
Align the pin on the rear master cylinder
holder with the hole on the handlebar.
Install the rear master cylinders and holder
with the "UP" mark facing up.
Install the bolts and tighten the upper bolt
first then tighten the lower bolt to the
specified torque.
Torque: 12 N•m (1.2 kgf•m, 9 lbf•ft)
Connect the brake light switch connectors.
Connect the left handlebar switch connector
and tighten the band bolt.
14-19
Hole
"UP" Mark
Brake Light Switch Connectors
Left Handlebar Switch Connector
XCITING 500
Pin
Bolt