20
. LIGHTS/METERS/SWITCHES
XCITING 500
Installs the side stand switch aligning the switch
pin with the side stand hole.
Install and tighten the side stand switch bolt
securely.
Hole
Pin
Connector
HORN
INSPECTION
Remove the front cover (page 2-11)
Disconnect the horn connectors from the horn.
Connect a 12 V battery to the horn terminals.
The horn is normal if it sounds when the 12 V
battery is connected across the horn terminals.
Horn
REMOVAL/INSTALLATION
Remove the front cover (page 2-11)
Disconnect the horn connectors from the horn.
Remove the nut and horn.
Installation is in the reverse order of removal.
Nut
20-16