Camshaft Removal - KYMCO FILLY LX 50 Service Manual

7. CYLINDER HEAD/VALVES

CAMSHAFT REMOVAL

Remove the center cover. ( 2-3)
Remove the frame center.
Remove the four cylinder head cover bolts to
remove the cylinder head cover.
Remove the cam chain tensioner sealing bolt
and spring.
Remove the two bolts attaching the cam chain
tensioner and the tensioner.
Turn the flywheel counterclockwise so that
the "T" mark on the flywheel aligns with the
index mark on the crankcase to bring the
round hole on the camshaft gear facing up to
the top dead center on the compression
stroke.
Remove the two cylinder head bolts.
Remove the four cylinder head nuts and
washers.
Remove the camshaft holder.
Diagonally loosen the cylinder head nuts
in 2 or 3 times.
7-3
Sealing Bolt
Camshaft Gear
Round Hole
Washer Nut
FILLY LX 50
Cylinder Head Cover
Bolts
Punch Marks