KYMCO XCITING 500 Service Manual page 215

12
. A.C. GENERATOR/STARTER CLUTCH
Clean any oil from tapered portion of the
crankshaft.
Install the woodruff key in the crankshaft
key groove.
Clean any oil from the tappered portion of
the flywheel I.D..
Install the flywheel/driven gear onto the
crankshaft, aligning the key way with
woodruff key.
Apply oil to the washer and flywheel nut
threads and seating surface.
Install the washer and flywheel nut to the
crankshaft.
Hold the flywheel with the special tool and
tighten the flywheel nut to the specified
torque.
Special tool:
Flywheel holder
Torque: 55 N•m (5.5 kgf•m, 40 lbf•ft)
12-7
Woodruff Key
Flywheel Holder
E021
XCITING 500
Nut/Washer