Brake Light Switch; Ignition Switch - KYMCO XCITING 500 Service Manual

Hide thumbs Also See for XCITING 500:

Table of Contents

. LIGHTS/METERS/SWITCHES

BRAKE LIGHT SWITCH

Remove the upper handlebar cover (page 2-5).

Disconnect front or rear light switch connector

and check for continuity between the switch

There should be continuity with the front or rear

brake lever squeezed, and there should be no

continuity with the front or rear brake lever is

Brake Light Switch

Ignition Switch (Comb Switch)

Remove the front cover (page 2-11).

Disconnect the ignition switch connector and

check for continuity at the switch side connector

Continuity should exist between the color code

wires as follows:

Table of Contents