KYMCO XCITING 500 Service Manual page 89

4
. LUBRICATION SYSTEM
INSTALLATION
Install the gasket and oil cooler.
Install the washers and tighten the oil cooler
bolts to the specified torque.
Torque: 35 N•m (3.5 kgf•m, 25 lbf•ft)
Connect the oil cooler water hoses, tighten
the hose band securely.
Install the oil filter cartridge and fill the
crankcase with recommended engine oil
(page 3-11).
Fill the cooling system and bleed air (page 6-
6).
4-11
Gasket
Oil Cooler
XCITING 500
Bolts
Washers